Use this page to download the current FlowTrem2 routing drawings and matching 1:1 DXF geometry.
PDF drawings are the governing installation reference.
DXF files contain 1:1 routing geometry in millimeters for CAD/CAM use. Do not scale. Routing depths, orientation, stud geometry and installation notes are defined in the corresponding PDF drawing.
6-String — Recessed Routing
Drawing: FT2-6-RT-Recessed · Rev. 01
FT2_6-String_Recessed-Routing.pdf311.42 KiB
FT2-6-Recessed_DXF-Rev01.zip42.1 KiB
Includes:
- FT2-6-Recessed_01-Top-Recess.dxf
- FT2-6-Recessed_02-Main-Cavity.dxf
- FT2-6-Recessed_03-Block-Clearance.dxf
- FT2-6-Recessed_04-Spring-Cavity.dxf
6-String — Top-Mount Routing
Drawing: FT2-6-RT-Top · Rev. 01
FT2_6-String_Top-Mount-Routing.pdf286.62 KiB
FT2-6-Top-Mount_DXF-Rev01.zip21 KiB
Includes:
- FT2-6-Top_01-Block-Clearance.dxf
- FT2-6-Top_02-Spring-Cavity.dxf
7-String — Recessed Routing
Drawing: FT2-7-RT-Recessed · Rev. 01
FT2_7-String_Recessed-Routing.pdf283.74 KiB
FT2-7-Recessed_DXF-Rev01.zip42.4 KiB
Includes:
- FT2-7-Recessed_01-Top-Recess.dxf
- FT2-7-Recessed_02-Main-Cavity.dxf
- FT2-7-Recessed_03-Block-Clearance.dxf
- FT2-7-Recessed_04-Spring-Cavity.dxf
7-String — Top-Mount Routing
Drawing: FT2-7-RT-Top · Rev. 01
FT2_7-String_Top-Mount-Routing.pdf289.34 KiB
FT2-7-Top-Mount_DXF-Rev01.zip21.1 KiB
Includes:
- FT2-7-Top_01-Block-Clearance.dxf
- FT2-7-Top_02-Spring-Cavity.dxf
DXF File Standard
- Geometry is 1:1 in millimeters.
- Do not scale on import.
- Routing contours are closed paths.
- String centerline and stud-center marks are reference geometry only unless explicitly used for machining.
- The PDF drawing governs routing depth, top/bottom orientation and all installation dimensions.
- Verify one known dimension after import before machining.
Always verify the drawing revision.
Use DXF files only with the matching current PDF drawing and revision.
Related Guides
Installing FlowTrem2 in a New Build
Replacing an Existing Floyd Rose-Style Tremolo with FlowTrem2